Troubleshooting Guide for a Honda HS724 Snowblower

Honda 724 SnowblowerFew things are more distressing than a snowblower that won’t start, won’t move forward, or simply won’t clear snow. While these problems can be hard to handle at first, most homeowners will be relieved to learn that most are easily solved by a few troubleshooting procedures. Whether it’s checking the fuel valve, removing obstructions from the intake chute, or handling other minor issues, these quick fixes will allow the snowblower to function like new in a matter of just moments.

Safety First: Don’t Risk Injury During Troubleshooting

Snowblowers like Honda’s HS724 pack a serious amount of power, requiring owners to cover their bases and follow strict safety guidelines when troubleshooting the equipment. Place the snowblower in an open area outdoors, or at least an indoor area with excellent ventilation, prior to starting it or working on it. Always perform troubleshooting on a cold engine, and never troubleshoot a snowblower that’s still hot after being recently used.

Troubleshooting should always take place on a flat surface, and preferably a solid one that won’t absorb oil or gasoline in case of a spill. Wear safety attire and make sure at least one other person is nearby in case emergency assistance is required.

Common Engine Problems

The most common problems with a snowblower involve its starter and the level of engine power applied to clearing snow after a major storm. Before preparing for the worst, consider solutions to a few common engine problems that might affect the HS724.

The Engine Will Not Start

If the engine refuses to start, the problem is most likely attributable to the gasoline it’s using during operation. Make sure that any gasoline in the equipment is not leftover from the previous year’s snow clearing. If so, it might simply be too stale to ignite, causing the engine to remain without power. Also be sure that the fuel valve is switched to the “on” position. If not, no fuel will be allowed in the engine and the engine won’t start. The throttle position or choke lever may also be in the wrong position, so check these before continuing.

The Electric Starter is Not Functioning

On models with an electric starter, a failure of the equipment is almost always the fault of the power cord bundled with the HS724 snowblower. This cord can sometimes get worn between seasons, causing it not to transfer power to the starter mechanism. Buy an OEM replacement cord and try again. If that still doesn’t work, the home’s electrical wiring or a specific electrical outlet may be to blame.

The Engine Starts, But Lacks A Sufficient Amount of Power

A low-powered engine has numerous causes, but the easiest one to solve is simply replacing old fuel with new. As mentioned earlier, stale fuel can present real problems during snowblower operation. If it doesn’t stop the engine from starting, it will certain reduce the level of power available when clearing snow.

Other causes of low power may be an engine speed that is too high for the amount of accumulated snow. Slow down the engine speed and clear snow a bit more slowly. Also consider clearing a narrower swath and making it wider over time, since this can greatly improve snowblower efficiency.

Other things to check include the auger housing, where debris may be causing engine problems, as well as the spark plug. A faulty spark plug or one with a large gap will simply cause the engine to be underpowered regardless of snow depth or engine speed.

Common Driving Problems

If the snowblower starts but doesn’t seem to be moving properly, then the issues affect the actual driving system and not the engine itself. These problems are just as easy to fix after a bit of quick troubleshooting.

The Snowblower Doesn’t Move at All

A completely immobilized snowblower generally is the result of transmission problems. Make sure the transmission is in the “engaged” position rather than the “released” position. If this doesn’t change anything, make sure that the transmission fluid is properly filled.

More serious causes of this problem include a damaged or faulty drive belt, a drive clutch lever issue, or a shift lever position problem. Make sure the shift lever is not in neutral. If the problem involves the clutch lever, contact a Honda service technician.

Common Snowblower Problems

Snowblower issues include those that stop the efficient clearing of snow. If this happens, prepare to remove obstructions or alter the way the equipment is used around the home in deeper accumulations.

The Snowblower Doesn’t Operate at All

If the snowblower isn’t actually blowing snow, this is generally because of broken shear bolts, a restricted intake chute, or a worn drive belt. These same issues may cause the snowblower to stop discharging snow properly as well, so its’ worth checking them whether the issue involves intake or discharge.

Where to Buy Honda Snowblower Parts

RalphHelmInc.com offers snowblower owners a great online parts lookup tool and a wealth of OEM Honda replacements. For compatibility and long-term durability, there simply is no better option available to HS724 owners.

This entry was posted in Uncategorized and tagged , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>